808nm 40W Fiber Coupled Diode Laser
HPL bar array products can be customized according to customer requirements and utilize packaging technologies with indium solder or AuSn solder, offering advantages such as high reliability, high photoelectric conversion efficiency, excellent stability, superior beam quality, low smile effect, and narrow linewidth. The products cover a wide range of wavelengths and power levels, with wavelengths ranging from 630nm to 1550nm and power levels from watt-class up to continuous 250W and quasi-continuous 500W.A variety of structures are available to choose from, including conduction cooling, microchannel cooling, and macrochannel cooling methods. Packaging structures include single bar, vertical stack, horizontal line array, 2D planar array, and fiber-coupled products.Optical options include fast/slow axis collimation, VBG wavelength locking, beam transformation systems (BTS), beam combining, spot homogenization, and integrated laser head design. The products are characterized by low divergence angles and high directivity.
Main features：
wavelength
808±3nm
output power
40W
Application：
Performance Parameter
Structure Size (mm)
Instructions for use
-Avoid eye and skin exposure to direct radiation during operation.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 20℃ to 30℃ .
-Storage temperature ranges from 0℃ to +50℃.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 20℃ to 30℃ .
-Storage temperature ranges from 0℃ to +50℃.
